Skip to product information
1 of 8

PEY Bambu Lab X1/P1 Plate

PEY Bambu Lab X1/P1 Plate

Regular price $18.00 USD
Regular price Sale price $18.00 USD
Sale Coming Soon!

Dual Sided Build Plate for the Bambu Lab X1/P1 Series

Ships from California, USA!

Buy any 3 plates to get 15% off!

The PEY/PEI build plate is an aftermarket accessory that is designed for the Bambu Lab X1/P1 series printers. It is 256x256mm, attaches to the magnetic bed of the printers, and is the same size as the official Bambu Lab plates. The PEY plate features unique textures that transfer onto the first layer of your prints! The PEI side is a textured finish that is similar to the official Textured PEI plates from Bambu Lab.

One side is the Smooth PEY texture and the other side is Textured PEI. Both sides behave the same in terms of usage and maintenance. The plate has a spring steel center that attaches to the magnetic bed on the Bambu Lab X1/P1 printers.

The PEY plate is ideal for PLA, PETG, TPU, and ABS and is capable of sustaining up to 130C. The PEI plate is ideal for PLA, PETG, ABS, TPU, ASA, PVA, PC, and PA and is capable of sustaining up to 180C. The texture/coloring on the plates is a physical attribute and will transfer to the bottom of your prints to create a unique finish that helps cover up layer lines. The plates are easily cleaned with warm water and soap, the same as the official plates.

All the photos, testing, packaging, and shipping are done in California, USA.

Notes:

  • The PEY side may degrade if using the PEI side above 130C. However, this will only be an issue if you use this build plate on a modified Bambu Lab printer/other printer that allows the heatbed to reach 130+C. Bambu Lab printers maximum heatbed temperature is 110C, so there will be no issue.
  • LIDAR very rarely shows a warning for first layer inspection abnormality, but continue on normally (I've seen it once in over a dozen tests)
  • Using glue will work on the plate, but the texture/coloring will not transfer
  • Use the 'Smooth PEI / High Temperature Plate' or 'Textured Plate' option in Bambu Studio
  • Increasing the Bed Temperature to 60-65 will help with adhesion
  • An outer brim will help immensely in ensuring no warping
View full details